Table of Contents
Advertisement
EVO XS
Manual
4.2.11. Satellite Scan
key a second time will clear the check mark.
•
Using the SAT Select key, you can select more than one satellite. Once you
have selected the desired satellites, press the OK key to start searching those
satellites. The receiver will search all satellites selected with the SAT Select
key, as well as the satellite that is currently highlighted.
•
If you are using a DiSEqC and you have not specified a DiSEqC switch port
when searching more than one satellite, the receiver will auto-detect the
correct DiSEqC settings.
•
If using an HH motor, indicate the correct motor setting in the antenna Setup
menu for each satellite to be searched. During the Satellite Scan, the dish will
automatically move before the scan starts for each satellite.
4.2.12. Satellite TP Scan
•
Satellites can be scanned directly from
the Satellite Scan menu. Select Satellite
Scan and press OK.
•
Scroll through the satellite dropdown list,
and select a satellite by pressing OK. Or
press the SAT Select (Red) key to place
a check mark next to the satellites you
wish to search. Pressing the SAT Select
•
Individual transponders (TP) can be
scanned with TP Scan.
•
To do so, select TP Scan and press
OK.
•
Select the satellite to be scanned.
•
Highlight the TP to be scanned and
press OK.
•
More than one TP can be selected by
using the Select TP (Red) key.
26
User's
Advertisement
Table of Contents
