Software Update - Az-Box EVO XS User Manual

EVO XS
Manual
4.4. 2. Software & Data Transfer
4

.4.2.1. Software Update

Never transfer software or data from a different model receiver. If transferrin
software to the receiver using your PC, be sure to use the correct file.
•
Enter the Transfer Program menu o
•
Power on the Slave Receiver.
O nce the transfer is completed, a
transfer was successful. If an error message appears, you will need to start the
transfer process over again.
O f course the actualization file can also be transferred from your computer The
procedure is the same as the proceeding one. But in this case, the computer will
work in master mode while your receiver is slave. This transfer is realized by one
easy service software called "Azloader". Setup on this program
successful". Nevertheless, doing thi
service.
The firmware program in the master
receiver can be transferred to anothe
(slave) receiver using this function.
•
Connect the null modem
cable between the two receivers.
When doing the connection of
receiver to PC or receiver to
receiver, the receivers must be
unplugged from the power socket!
n the Master receiver.
message will appear informing you that the
the COM port you are usin
COM2 or COM3...) on your computer
load the appropriate actualisation file you
have ready in some folder (downloaded
from the Internet). In the next step, unplu
the receiver from the power socket –
clicking on "Start" at "Azloader" – and
a minute for the message "download
s operation is intended for a specialize
37
User's
g
r
serial
g (COM1,
–
g
wait
d