Time Setting; Timer Setting - Az-Box EVO XS User Manual

EVO XS
Manual

4.1.4. Time Setting

If the satellite signal of current service doesn't contain the TDT, the current time
cannot be set up using the Automatic Synchronize. In this case, adjust the time
manually by turning the Automatic Synchronize OFF. The adjustment step size
is 30 minutes by using the ◄,► keys, and one minute by using the Page
Up/Down button.
Daylight Saving Time: When turned on, the clock will adjust for daylight
saving time.

4.1.5. Timer Setting

Channel Reminder setting.
Sleep time: Enter the time for the receiver to automatically switch OFF and go
to standby mode.
Wake up time: Enter the time for the receiver to automatically power ON.
VCR Record: Set the timer to power on and off for a VCR Recording.
Automatic Synchronize ON: Current time
is based on the TDT (Time Description
Table) in the satellite signal for the current
program. To set the current time, input the
Offset value by using the standardized
information of your current service area.
The time setting will be used as the
standardized time for the TV Guide, Wake
up and Sleep time.
Timer Number: Eight timer events can be
programmed at one time.
Timer State: Each timer event can be
turned off or on.
Timer Cycle: Each timer event can be
programmed to occur at various time
intervals.
Timer Service: There are four timer event
options, Sleep, Wake Up, VCR record, and
20
User's