Canon iPF750 series Service Manual page 267

Display massage Code*
Insufficient paper for job 03862000-2E09
Online: Print
Stop: Stop Printing
Load/Eject:
Change Paper
Cannot cut paper. 03870001-2015
Lift the release lever and
reload the paper.
Cannot adjust optic axis. 03863000-2824
Press Online to clear the
error.
This type of paper is not 03061000-2E15
compatible with HP-GL/
2.
Online: Print
Stop: Stop Printing
Load/Eject:
Change Paper
Mail box full. 031A1001-2905
Delete unwanted data on
your computer to resume
printing. Press Stop to
cancel printing.
Mail box full. 031A1006-2906
Cannot save. Delete
unwanted data on your
computer to resume
printing.
Press Stop to cancel
printing.
Hard disk error. 031A1002-2908
Press OK to reformat
File read error. 031A1002-2909
Turn off printer, wait a
while, and turn it on
again.
Invalid files will be
deleted.
Hardware error. 03800500-2F31
03800500-2F31
Turn off printer, wait,
then turn on again.
Hardware error. 03130031-2F3C
03130031-2F3C
Turn off printer, wait,
then turn on again.
No printhead 03800100-2800
Install printhead.
Wrong printhead. 03800200-2811
Open top cover and
replace the printhead.
No maintenance 03841101-2818
cartridge.
Check the maintenance
cartridge.
This type of media is not 03860006-2825
compatible with HP-GL/
2.
Cannot cut paper. 03870001-2019
Lift the release lever and
reload the paper.
Insufficient paper for job 03862001-2E31
Paper jam. 03010000-2E3A
Manually rewind roll all
the way and press OK.
Sheet printing is selected. 03060100-2E02
Press Load/Eject and load
sheets.
Borderless printng not 03861001-2408
possible. Check
supported paper.
Borderless printng not 03861001-2407
possible. Paper stretched
or shrank.
Confirm usage cond. of
the paper.
Condition detected
Not enough roll media on remaining roll media
quantity detection
Cutting failure
Optical axis error
Non-support media of HP-GL/2
The job store executed when the free hard disk space
left for Personal Boxes in the printer's hard disk is full.
The store executed when 32 jobs are stored in the
Personal Box.
Hard disk format error
Hard disk file error
Non-discharge detection optical axis error
LF pressure error
Printhead not installed
Printhead version error
Mauntenance cartridge not installed
Paper type mismatch at HP-GL/2 printing
Cut failure (during jam occure)
Not enough roll media
Madia load failure
Cut sheet in not set
Borderless printing disabled (unsupported size)
Borderless printing disabled (engine detection)
Action
Renew the supply of roll media.
Cut paper manually.
Check the cutter.
Check the multi sensor.
Check the head management sensor.
Exchange for the compatible paper to HP-GL/2 before
reprinting.
Delete unneeded jobs stored in Personal Boxes.
Delete unneeded jobs stored in Personal Boxes.
Press the [OK] button to start reformatting the hard disk.
When formatting is finished, the printer automatically
restarts.
Restart the printer. Only the corrupted files will be
deleted, and the printer will restart.
Check the head management sensor.
Replace the head management sensor.
Replace the printhead.
Check the pinch roller and surrounding part.
Replace the pinch roller pressure drive unit.
Install the printhead.
Replace the printhead.
Install the maintenance cartridge.
Exchange for the compatible paper to HP-GL/2 before
reprinting.
Check the cutter unit and surrounding part.
Replace the cutter.
Renew the supply of roll media.
Check the pick-up unit and roll media.
Check to see if paper has not jammed.
Load cut sheets at the paper tray port.
Check the media size.
Change the media size.
Reload the paper.
Chapter 8
8-9