Canon iPF750 series Service Manual page 235

- Press the or key to choose the [Set./Adj. Menu]and press the [OK] key.
* "SERVICE MODE" appears in the menu list and the MESSAGE LED flashes.
- Press the key or key to choose "SERVICE MODE" and press the [OK] key.
2) Set the following e-RDS setting items No.1-4.
(If the result of the communication test (COM-TEST) is "NG", execute setting items No.5-6 to solve the problem.)
No. Item
1 E-RDS SWITCH
2 UGW-ADDRESS
3 UGW-PORT
4 COM-TEST
5 COM-LOG
6 ERDS-DAT
3.3 Service Mode Menu Tree
First Level
DISPLAY
I/O DISPLAY
ADJUST
FUNCTION
REPLACE
COUNTER
SETTEING
INITIALIZE
* Press key to move to the next menu of the same layer, and press
* The menus shown in '*1' are the e-RDS-related menus.
Type
2 bytes OFF : Disable/ ON : Enable e-Maintenance/ imageWARE Remote system to send device information,
meter data, and error statuses to the UGW.
Default value is OFF (not in use)
129 bytes The UGW address by default : https://a01---.
(NULL The complete address is not provided in this document for security reason.
included, SJIS
not allowed)
4 bytes The UGW Port Number by default : 443
Validation : 1-65535
To perform Communication test with UGW and set "OK!"/ "NG!" as the result.
Detailed communication data log
Switches to display time when error occurred, error code, and error data up to now.
Max 30 loggings retained.
Max 128 characters (not containing NULL) for Error information.
Initialize e-RDS setting data
Second Level Third Level
Pth
RTC
PV AUTO JUDGE
NETWORK CERTIFICATE
E-RDS E-RDS SWITCH:*1
UGW-ADDRESS:*1 http://XXX
UGW-PORT:*1
COM-TEST:*1
COM-LOG:*1
HEAD DOT INF
WARNING
ERROR
ADJUST
W-INK
CARRIAGE
PURGE
INK-USE CNT
W-INK-CHG CNT
HEAD-CHG CNT
HDD BOX PASS
PARTS-CHG CNT
PARTS COUNTER
USER SETTEING
CA-KEY:*1 YES/NO
ERDS-DAT:*1 YES/NO
T-7-43
Description
T-7-44
Fourth Level Fifth Level
CA-CERTIFICATE VALIDITY:*1
ON/OFF
XXXXX
YES
key to move to the menu of one layer deeper.
Chapter 7
YYYY/MM/DD
7-27