AS MOTOR AS 900 ENDURO Operating Instructions Manual page 22

V-belt
Bowden cables
Acceleration lever
Chassis and im-
pact protection
Label
Engine
Parking brake
Check the foot
brake
Flammable materi-
al
Steering
Tyres
Safety switches
Ignition lock
Hydrostatic trans-
mission
Differential gear
Battery
Lubrication
22
Are the belts tensioned correctly, without fissures, and in
good condition?
Check for proper function and ease of movement.
Check for proper function.
Check for rust and fissures and check the welding seams.
Are all protective devices and covers in place, fastened
correctly and properly functioning?
Condition of the labels.
See operating instructions of the engine manufacturer.
Check oil level (see operating instructions of the engine
manufacturer).
Oil change.
Oil filter change
Check.
Check the foot brake
Remove easily flammable debris buildup from the engine
and the device.
Check the clearance.
Check tyres and, if necessary, the tyre pressure.
Check the switches at the driver seat, cutting height ad-
justment, and drive for proper function.
Check for proper function.
Check oil level.
Repair leaks.
Oil change after 50 h and every 200 h thereafter.
Perform oil change.
Check for oil contamination.
Check the charging conditions.
See chapter grease lubrication
▲
■ ▲
□ ▲
■ ▲
■ ▲
■ ▲
■ ▲
■ ▲
▲
▲
■ ▲
□ ▲
■ ▲
■ ▲
■ ▲
■ ▲
□ ▲
■ ▲
▲
▲
▲
■ ▲
▲
■ ▲■