Related Manuals for AS MOTOR Allmaher 65/4T BS Enduro
Summary of Contents for AS MOTOR Allmaher 65/4T BS Enduro
- Page 1 Operating Instructions Allmäher® AS 65/4T BS Enduro From serial number: 021310020001 Issued: 26 June 2012, V13.0 EN-Translation of the Original Operating Instructions...
-
Page 2: Preface
dummy Preface Intended use The device is exclusively intended for cutting Please fill in all data referring to your device. When ordering spare parts, provide your deal- grass or similar vegetation in well maintained er with the device and engine number. areas in agriculture, forestry, and landscape conservation that are mowed at least once a Serial number:... -
Page 3: Table Of Contents
Contents Switching off and parking ....... 16 Preface ............. dummy Maintenance and cleaning ...... 17 Intended use ..........Preparations .......... 18 Explanation of the symbols ....Cleaning the device ....... 19 dummy Inhalts verz eichnis General inspection ......... 19 Symbols in the instructions ....Chain lubrication ........ -
Page 4: Explanation Of The Symbols
dummy Inhalts verz eichnis Explanation of the symbols Prior to any repair and mainte- nance work, pull off the spark plug connector. Symbols in the instructions In these operating instructions, the following symbols are used to denote special dangers. Warning. These symbols denote special Clean the ventilation grid! dangers. -
Page 5: Safety Instructions
Use gloves and avoid skin Safety instructions contact with the fuel. Get informed! For your safety, read these operating instruc- Fuel up outdoors only when the engine is cool tions with care. Familiarize yourself with the and not running. Use a filler or funnel. control elements and the proper use of the Do not spill any fuel and do not let the fuel get device. -
Page 6: Use Caution During Operation
Do not remove, change or override any safety Prior to mowing devices or control elements. Personal protective measures Observe the maintenance instructions and replace damaged or worn parts immediately. While mowing, always wear sturdy footwear with good grip, Have an authorised service centre check your long trousers, and gloves. -
Page 7: When Work Is Completed
Mowing surfaces with fire hazard Be extremely cautious when turning the device round or pulling it toward you and when mov- – Carry a sufficient amount of suitable extin- ing in reverse. guishing agent. – If side inclination is too great, fuel may leak Always walk slowly! from the carburetor or the tank. - Page 8 – when changing a part, our original parts or parts authorised by use were not used. – the repair work was not carried out by an authorised service station. The same applies for spare parts and accesso- ries.
-
Page 9: Device Description
Device description Steerable front wheel Protection skirt Protection bow Interlock steerable front wheel Cutting height adjustment Spark plug connector Silencer Ventilation grid Oil filler opening 10 Starter grip 11 Lateral adjustment of handlebar 12 Handlebar console 13 Lever for lateral adjustment of handle- 14 Type plate 15 Switching lever 16 Tank ventilation... -
Page 10: Control Elements
Blade clutch lever (3 ) Control elements The blade clutch lever is a safety device. When you release the lever the blade comes to a standstill within 7 seconds Engaging blade (I): Lift the blade clutch lever, engage the latch knob (8) and press the blade clutch lever towards the handlebar. -
Page 11: Assembly
– Operating instructions of the engine manu- Switching lever facturer The transmission has 5 forwards gears, neutral position, and one reverse gear. For switching, Unpacking release the drive lever, switch to the next gear and continue to drive. 1. Open the box at the top. 2. -
Page 12: Transport
Transport Warnung! Risk of injury due to the heavy weight of the device. The device can fall over and fall down and cause severe injuries. Observe the following notices. Transport the device on a freight vehicle or a trailer which is designed for a carrying capacity of at least as great as the empty weight of the device. -
Page 13: Prior To Starting
To keep the area well maintained, mow fre- Tanking up quently and keep the grass short. Only mow with a sharp and undamaged blade. Danger! Have the blade sharpened and balanced Fuel is ignited by hot engine parts. regularly (by authorised service centre). Prior to filling up, switch off the engine and wait for at least Do not mow when the grass is wet or when it is... -
Page 14: Locking Steerable Front Wheel
Starting Danger! During startup, there is a risk of injury caused by the rotating blade. Make sure that no one is within the danger zone of the blade. Do not tip the device over to one side during startup. Danger! If after startup the carburetor does not close properly, fuel will overflow 1. -
Page 15: Oil Pressure Switch
Disengaging the blade when moving over Reverse gear paths: 1. Release the blade clutch lever. Danger! Risk of injury caused by slipping or Oil pressure switch tripping during moving in reverse or The oil pressure switch of the engine shuts off turning. -
Page 16: Switching Off And Parking
of slipping is reduced and safe braking is made possible. When the differential lock is released, the device can be steered and turned with ease. leer er Abs atz Switching off and parking Caution! On a slope, the device can roll away. -
Page 17: Maintenance And Cleaning
Maintenance and cleaning warranty. Operational safety is endangered as Regular maintenance keeps your device ready well. for use. Contact your authorised service centre for If you do not observe the maintenance notices, checkup if you detect problems during mainte- faults may occur that are not covered by the nance. -
Page 18: Preparations
Component Action Maintenance interval ▲ V-belt Are the V-belts tensioned correctly, without fissures, and in good condition? ■ ▲ Bowden Check for proper function and ease of movement. cables □ ▲ Acceleration Check for proper function. lever ■ ▲ Chassis and Check for rust and fissures and check the welding seams. -
Page 19: Cleaning The Device
Cleaning the device Chain lubrication After each use, you should clean the device The chains on the right and left of the differen- thoroughly, especially the bottom side and the tial lock must be lubricated on a regular basis. blade. We recommend the use of biodegradable chain spray. -
Page 20: Checking The Engine Oil Level
- cooling fins of the engine For this, observe the attached operating in- clean at all times. structions of the engine. Checking the engine oil level Checking the drive 1. Put the device on a non-slip surface (e.g. For this, observe the attached operating in- concrete or asphalt). -
Page 21: Checking The Blade
Blade change Checking the blade Danger! Improperly mounted and main- tained blades pose a severe injury hazard. Work at the blade shall only be performed by an authorised service centre. Work on the blade requires special qualifica- tions because an unbalance test is required and the torques must be observed. -
Page 22: Longer Storage
“AS-Motor Germany”. When foreign parts are Also observe the notices on storage in the attached operating instructions by the engine installed, the warranty and guarantee shall be manufacturer. void for the foreign part and for the device and for any resulting damage. Inform your authorised service centre about Longer storage the device type and serial number of your... -
Page 23: Warranty
Warranty The conditions of the warranty can be found on the reverse side of your warranty card. Send the filled-out warranty card immediately after the purchase of your device to “AS-Motor Germany” or the supplier. Other- wise, the warranty is no longer valid. Preserve the proof of purchase or the warranty card that was filled out by the vendor. -
Page 24: Troubleshooting
Troubleshooting You can find an authorised service centre on The following table contains the most frequent our home page www.as-motor.de. problems and their elimination. If more prob- lems occur, contact the closest authorised service centre. Problem Possible cause Remedy Engine does not Engine stop switch is set to Switch the engine stop switch to ON. - Page 25 Problem Possible cause Remedy Fuel is poor quality, dirty, or Clean the fuel system (authorised old. service centre). Always use fresh fuel. Engine starts badly Choke is closed. Open choke. or runs irregularly Air filter is soiled. Clean air filter (see also Maintenance and cleaning).
- Page 26 Problem Possible cause Remedy Cooling fins of the engine are Have cooling fins cleaned by author- dirty. ised service centre. Uneven cut, lawn Blade is dull or worn. Have blade balanced and re- becomes unsightly sharpened by an authorised service centre.
-
Page 27: Technical Data
Technical data Type AS 65/4T BS Enduro Range of application (temperature) 0 - 30 °C For temperatures below 5 °C, observe the engine manufacturer’s information regarding the engine oil. Engine, type One cylinder four stroke engine Manufacturer Briggs & Stratton Type 21 Series 3 Intek Cylinder capacity... -
Page 28: Declaration Of Conformity
Declar ati on of c onfor mity AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.de Declaration of conformity We declare that the lawnmower type AS 65/4T BS Enduro with serial number starting from 021310020001 as brought into circulation by us conforms to all relevant 2006/42/EG safety and health requirements of the EC directives 2004/108/EG... - Page 29 Umbruc h...
- Page 30 Umbruc h...
- Page 31 Umbruc h...
- Page 32 Mar keti ng AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.de Professional technology for gardens and landscapes Allmäher® Manoeuvrable meadow mower for extensive green area care. The Allmäher reliably shreds metre-high grass, undergrowth, and weeds. Ride-on Allmäher® Ease of use and high area coverage all combined in a compact ride-on mower.