Electrohome Marquee Ultra Series User Manual page 65

I
Side Pin
The Side Pincushion function adjusts pincushion of the sides of the display
image.
The two displays shown below demonstrate side
pincushion adjustment.
To adjust side pincushion, select Side Pin
from the Geometry menu then press Ill or @l
until the sides of the image are as curved or
as straight as desired.
Top
The Top function adjusts the level (Top Key)
and pincushion (Top Pin) of the top half of the
display image. The four displays shown here
demonstrate Top adjustments.
To stretch the upper left or right comer up or
down, select Top from the Geometry menu
and press m or m. To adjust top pincushion,
press g or@ until the top half of the image
is as curved or as straight as desired.
Bottom
The Bottom function adjusts the level (Bottom
Key) and pincushion (Bottom Pin) of the
bottom half of the display image. The four
displays shown at right demonstrate Bottom
adjustments.
To stretch the lower left or right comer up or
down, select Bottom from the Geometry
menu and press m or @. To adjust bottom
pincushion, press a or R until the bottom
half of the image is as curved or as straight
as desired.
Bow
The Bow function adjusts horizontal bowing (H
Bow) across an image. It also adjusts vertical
curvature (V Bow) in the middle of the picture.
The four displays at right demonstrate H Bow
and V Bow adjustments.
3-23
. . . . .