Konica Minolta Bizhub C252 User Manual page 36

Scanning Documents
No. Part Name
7 [Copy] key
8 [Reset] key
9 [Interrupt] key
10 Auxiliary power button
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 Keypad
17 [C] (clear) key
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 Contrast dial
22 [Enlarge Display] key
23 [Accessibility] key
C252
Description
Press to enter Copy mode. (As a default, the
machine is in Copy mode.) While the machine is in
Copy mode, the indicator on the [Copy] key lights
up in green.
For details, refer to the User's Guide [Copy Opera-
tions].
Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
Press to enter Interrupt mode. While the machine is
in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in
Interrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key
again.
Press to turn on/off machine operations, for exam-
ple, for copying, printing or scanning. When turned
off, the machine enters a state where it conserves
energy.
Press the [Stop] key during scanning to stop the
scan operation.
Press to start scanning. When this machine is ready
to begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
Lights up in green when the machine is turned on
with the auxiliary power button.
Flashes in green while a print job is being received.
Lights up in green when data is being printed.
Press to print a single proof copy to be checked
before printing a large number of copies.
Use to type in the number of copies to be
produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
Press to display screens showing the specified
settings.
Press to display the Utility screen and Meter Count
screen.
Press to register the desired copy settings as a pro-
gram or to recall a registered copy program.
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the screen for specifying user
accessibility functions.
2
2-3