Raw Port No - Konica Minolta Bizhub C252 User Manual
Network scanner
Hide thumbs
Also See for Bizhub C252:
- Operation manual (464 pages) ,
- Network scanner operations (462 pages) ,
- User manual (384 pages)
Table of Contents
Advertisement
3
Note
To cancel changes to the setting, touch [Cancel].
RAW Port No.
Specify the RAW port numbers used by the printer. By specifying multiple
port numbers, multiple data can be accepted simultaneously.
1
In TCP/IP Setting screen 5/5, touch [RAW Port No.].
The RAW Port Number screen appears.
2
Touch the button for the desired port.
3
Touch [ON] or [OFF].
4
To use the selected port, press the [C] (clear) key to erase the value,
and then use the keypad to type in the RAW port number (between 1
and 65535).
–
If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
5
Touch [OK].
The RAW port usage and RAW port numbers are set.
Note
When using the RAW port, set [Spool Print Job in HDD before RIP] to
[ON]. A timeout may occur if it is set to [OFF].
3-54
Specifying Settings From the Control Panel
C252
Advertisement
Table of Contents
