Ftp Settings; Ftp Parameters - Konica Minolta Bizhub C252 User Manual

Specifying Settings From the Control Panel
3.14

FTP Settings

Settings for sending scan data to FTP servers can be specified.

FTP Parameters

The FTP parameters are as follows:
FTP Setting screen 1/3
Item
Proxy Server Address
Proxy Port Number
FTP Setting screen 2/3
Item
Port No.
Connection Timeout
FTP Setting screen 3/3
Item
FTP Client
FTP Server
C252
Description
Sets the proxy server address. Use the keypad in the
control panel to type in the address.
Sets the port number of the proxy server. To change the
value, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Description
Set the port number used to communicate with the FTP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
If the transmission stops while uploading data to the FTP
server, the upload operation is automatically aborted after
a specified time elapses. Set the time from the point when
the transmission stops to the point when the upload
operation is to be aborted. To change the value, press the
[C] (clear) key, and then use the keypad to type in the value
(between 5 and 300 seconds).
Description
Sets whether to use the Scan to FTP operation.
Specify whether to use this machine as an FTP server.
When using the copier as an FTP server, select "ON". When
using an application that links to the copier as an FTP client
of the copier, "ON" must be selected.
3
3-67