Smtp Server Address - Konica Minolta Bizhub C252 User Manual
Network scanner
Hide thumbs
Also See for Bizhub C252:
- Operation manual (464 pages) ,
- Network scanner operations (462 pages) ,
- User manual (384 pages)
Table of Contents
Advertisement
3
SMTP Server Address
The SMTP server address used to send e-mail can be specified.
1
In the E-Mail TX (SMTP) screen 2/4, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
–
To specify the host address with the IP address, touch [IP Address
Input].
–
To specify the host address with the host name, touch [Host Name
Input].
–
If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP Settings" on page 3-48.
3
Enter the host address (IP address or host name (up to 255 charac-
ters)).
–
To edit the values that you entered with "IP Address Input", touch
[←] or [→] to move the cursor to the desired area, touch [Delete],
and enter the new value.
–
To clear all values, press the [C] (clear) key.
4
Touch [OK].
The SMTP server address is set.
3-92
Specifying Settings From the Control Panel
C252
Advertisement
Table of Contents
