3
SMTP Authentication
Specify when the authentication method is set to SMTP authentication.
1
In the SMTP Detail screen under SMTP Authentication, touch [ON].
The SMTP Authentication screen appears.
2
In the SMTP Authentication screen, touch [User ID].
The User ID screen appears.
3
Type in the user ID (up to 63 characters).
4
Touch [OK].
–
To cancel changes to the setting, touch [Cancel].
The user ID is set, and the SMTP Authentication screen appears again.
5
In the SMTP Authentication screen, touch [Password].
The Password screen appears.
3-94
Specifying Settings From the Control Panel
C252