Status Notification Settings; Status Notification Parameters; To Specify Status Notification Settings - Konica Minolta Bizhub C252 User Manual

Specifying Settings From the Control Panel
3.24

Status Notification Settings

Settings for notifying the administrator of the machine's status by e-mail can
be specified. The status notification is sent if the e-mail address is entered
and if any of the notification conditions are selected.

Status Notification Parameters

The status notification parameters are as follows:
Item
Notification Address Setting
Notification Item Setting
Notification Time Setting
Specify the "Printer Location" that is included in the e-mail text of the status
notification function in PageScope Web Connection. For details, refer to
"IPP" on page 4-82.

To specify status notification settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [3 Status Notification Setting].
– To quit specifying the Utility mode setting, touch [Exit] in the sub
display area. Otherwise, cancel the Utility mode by touching [Close]
in each screen until the screen for the Copy, Fax, Scan or Box mode
appears.
– Refer to "E-Mail TX (SMTP) Parameters" on page 3-88 for more de-
tails.
The Status Notification Setting screen appears.
C252
Description
Sets the e-mail address where notification of the machine's
status is to be sent. Use the keyboard that appears in the
touch panel to type in the e-mail address (up to 320
characters).
Sets the conditions under which notification of the ma-
chine's status is to be sent by email. For details on specify-
ing the settings, refer to "Notification Item Setting" on
page 3-106.
Sets the time when notification of the machine's status is to
be sent. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and 10
minutes).
3
3-105