Programming Help Lists - Marantz RC5200 User Manual

Customizing Your RC9200/5200
4.

Programming Help Lists

1 Write a list of all of the actions in the operation you want to
record.
2 Gather all of the remote controls you will need for the operation.
3 Navigate to the Device side of the RC9200/5200.
4 Select ADD from the Mode menu. Choose "Create New Device"
when prompted (see page 35-40).
In the "Other" division there is a device group labeled "Help."
Add the Help device.
5 Switch to LABEL mode. Relabel the new device currently
labeled Help (for details on relabeling devices, see page 32-34).
Use no more than 8 characters (more won't fit). Try to use a
descriptive title like POWER, RECORD, etc.
6 Stay in LABEL mode. Relabel any of the introductory text on
panel 1. Type in any guidelines your family may need to know
for this operation.
6 Stay in LABEL mode. Relabel as many of the buttons on the
five panels as you need.
Tip
7 Switch to LEARN mode. Teach each button the appropriate
command.
8 Switch to MOVE mode. Move the new device to the appropriate
position in the device list (remember, this determines the button
position on the Home panel).
9 Return to USE mode and test out your new list. Congratulations!
10 You can make as many Help lists as you like. Simply repeat
steps 1 through 9 for each operation you would like to program
a help list.
User Guide
22
Do not relabel the buttons labeled "Press for Next Help Screen"
unless the button is the last step in the operation.