Getting Started; Activating The Rc9200/5200; Turning On The Display; Using The Backlight - Marantz RC5200 User Manual

Getting Started

Turning on the Display

Tap the screen gently with your finger or a blunt, soft object like
a pencil eraser.
The display is activated and you see the Home panel.
Notes

Using the Backlight

Press the backlight button on the left side.
The backlight shuts off after a few seconds to save power.
Note
Modes
The RC9200/5200 has different "modes." When you activate the
RC9200/5200 for the first time, it starts up in Use mode allowing
you to immediately operate your devices.In Use mode the menu
bar at the bottom of the screen displays the
Mode Menu. Tap the
an option. If the menu bar shows another symbol, like
to reveal the Mode menu and tap USE to return to normal
operating mode.
Note
User Guide
· If the display stays blank or becomes black, adjust
the contrast dial on the left side.
· If another panel is displayed, tap the Home button .
· The RC9200/5200 shuts down automatically after being left
alone for a few seconds (you can adjust the time out period in
the Setup panels).
In the settings (see page 13) you can choose to activate the
backlight automatically when you turn the RC9200/5200 on.
If you do not see the mode menu
deactivated via the Setup panel. Press and hold the center of
the bottom menu bar to overide the Mode menu deactivation.
6
symbol. A menu will pop up with USE as
symbol for the
, tap it
symbol; it has been