Programming Help Lists - Marantz RC9500 User Manual

Customizing Your RC9500
4. Programming Help List
1 Write a list of all of the operation you want to record.
2 Gather all of the remote controls you will need for the operation.
3 Select ADD from the Mode menu. Choose "Copy existing
4 Tap "Copy without RC codes" when it prompted.
5 Switch to LABEL mode. Relabel the new device currently
6 Go back to the Mode Menu page and re-enter to LABEL mode.
Tip
7 Switch to LEARN mode. Learn the appropriate command to
8 Switch to MOVE mode. Move the new device to the appropriate
9 Return to USE mode and test out your new list.
10 You can make as many Help lists as you like. Simply repeat
User Guide
device" when prompted. (see page 35)
In the device list, there is a device labeled "Help".
Tap it to add the "Help" device and "Select" button.
(see page 35)
labeled "Help 1". (for details on relabeling devices, see page 32)
Try to use a descriptive title like POWER, RECORD, etc.
Relabel as many of the buttons on the five pages as you need.
(see page 32)
Do not relabel the buttons labeled "Press for More ...." unless
the button is the last step in the operation.
each button .
position in the device list (remember, this determines the Device
button position on Device Overview page).
steps 1 through 8 for each operation you would like to program
a help list.
22