Page 1
DMXDIM4LED Upgraded 4 channel DMX dimmer / switch pack Suitable for switch mode power supply devices User’s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these...
Page 2
Dimmer/switch packs are mainly used for lamp based par cans, Damage may occur if connected to a unit with an electronic (switch mode) power supply. The DMXDIM4LED allows you switch on & off loads with electronic (switch mode) power supplies such as Laser and LED fixtures. BEFORE this can be done you must ensure there are no devices connected to the dimmers outputs and put the fixture into “switch”...
Page 3
2. Select DMX mode. Also it can run in 3 different channel modes. Press MODE button to switch between “DMX Mode” and “Standalone Mode”. Choose the DMX starting address. Press MODE button until the display shows “AXXX ”, then you can choose “XXX”...
Specifications: • Weight: 2.3kgs • Size:21×20×7cm • Power input: 240V 50HZ • Power output: 5A/Channel, Max15A • LEDS: 18PCS 5W (4 IN 1) • 3PIN female DMX XLR socket and 3PIN male DMX XLR socket • 4 button Digital LED menu 4 of 4 pages...