Motion Detection - HP f800x User Manual

Car camcorder

Hide thumbs Also See for f800x:

Table of Contents

3.2.8 Motion Detection

If Motion Detection is activated, turned off the car adapter when the

camcorder is powered on, the system alert message "Wait for 10

seconds to enter Motion Detection, or touch screen to power off." will

be displayed on the screen. This means the system will enter Motion

Detection automatically in 10 seconds, when the camcorder detects any

motion in front of lens, Video Record will be activated for a duration the

same as the length setting. If the screen is touched anywhere in 10

seconds, then this features powers off instead of entering Motion

Detection mode.

To set the motion detection, do the following:

Touch

entering Motion Detection menu,

then touch

(on).

Touch

Once the power connector is turned off, the message "Wait for 10

seconds to enter Motion Detection, or touch screen to power

off." will appear. The system will automatically enter motion

detection mode in 10 seconds, which enables the auto recording

function if any object moving in front of the cam is detected by this

product.

to enter main menu.

to switch over to Driving Safety Main Menu.

to select

again to activate

to return to record screen.

for

Table of Contents