Table of Contents
Advertisement
6.
The screen automatically turns off 60 seconds after this product
enters motion detection mode. Tap anywhere on the screen to turn
it on and tap it again to exit this mode. If the power connector is
turned off when this product is on, the message "Wait for 10
seconds to enter Motion Detection, or touch screen to power
off." will appear again. Please operate as instructed.
Note:
1. When the battery is fully charged and is in good condition, Motion Detection can
record continuously for about 30 minutes.
2. As the camcorder is used, the battery storage capacity will decrease gradually. This
is a normal phenomenon for the battery.
3.2.9 Collision Detection
Sensitivity of the Collision Detection function is set to medium by
default. This feature begins emergency recording once it detects any
vibrations caused by a collision. To change the settings of Collision
Detection:
1.
Touch
2.
Touch
3.
Touch
for entering Collision Detection
menu.
4.
Tap the
the sensitivity of this product's
collision detection (Off / Low
Sensitivity / Normal Sensitivity /
High Sensitivity).
5.
Touch
screen.
38
to enter main menu.
to switch over to Driving Safety Main Menu.
/
to select
/
keys to change
to return to record
Advertisement
Table of Contents
