Table of Contents
Advertisement
To set the correct date and time, do the following:
1.
Touch
2.
Select
menu. Touch
value; touch
previous or next field; confirm by
touching
setting.
Note:
If Time Sync. is on, camcorder clock will be calibrated via satellite clock signal based
1.
on Set Timezone. Please refer to Time Sync. (4.2)
2. If satellite positioning is not successful, camcorder clock will run based on user
defined time.
3. Please be aware that touching
recording process and enter into main menu. Please make sure the recording can
be stopped before operating menu selections.
2.6.3 Setting the Universal Time Code (UTC)
18
to enter Main Menu.
to enter Date / Time
/
to select
/
to select
to complete
during the recording process will stop the
Advertisement
Table of Contents
