Table of Contents
Advertisement
2.3 Connecting to Power
Use only the attached power connector for activating the camcorder and
charging the built-in battery. Using another charger may damage the Car
Camcorder and void the warranty.
1.
Connect one end of power connector to USB/Power connector port on
the camcorder.
2.
Plug the other end of the car adapter to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically turns on.
Note:
1. This product should be installed near the rear view mirror, at the center and top of
windshield for optimal viewing.
2. This product contains functions such as LDWS (Lane Departure Warning Systems)
(3.2.1),
FCWS (Forward Collision Warning
refer to the alignment measures given in the individual sections during their
installation for improved accuracy.
3. Please connect your Car Camcorder to the car charger for operation, otherwise its
LCD touch screen may fail to operate properly.
14
(3.2.2) and Front Vehicle Go (3.2.3). Please
System)
Advertisement
Table of Contents
