Key Buttons Definition; Power Source/Charging; Charging Instruction - Jensen SMPS-622 User Manual

Bluetooth wireless stereo speakers

Hide thumbs

Table Of Contents

Table of Contents

Button names

VOL+

VOL-

PLAY/PAUSE

Phone

This unit operates on built-in Li-Polymer battery. Before first use, please charge the

speakers for at least 6.5 hours because the battery may not fully charged, even

though the Green charging LED lights.

This unit operates on a built-in Li-Polymer battery that can be recharged either

using the USB port on your computer or from an AC adaptor (not included) with a

rated output of DC 5V, 1000mA.

Note: The mini USB charging port and the DC input jack located on the back of this

unit are designed for charging the built- in Li-Polymer battery. The unit will

still operate normally while charging, but doing this may reduce the battery

life.

CHARGING THE BATTERY WITH mini USB PORT

Charge the built-in Li-Polymer battery a minimum of 6.5 hours prior to first use.

Plug the unit into a USB port on your computer or into a USB power adaptor

(not included) using the included USB cable.

The Red charging LED located on the back of the unit turns Green when the

battery is fully charged.

Unplug the USB cable from the power source once the battery is fully charged.

After prolonged use, the battery voltage may discharge and operation might

become intermittent. When this happens, please recharge the internal battery.