Advertisement
INSTALLATION
HINT:
x
Use the same procedure for the LH side and RH side.
x
The following procedure is for the LH side.
1. INSTALL FRONT DISC
2. INSTALL FRONT DISC BRAKE CYLINDER MOUNTING
3. INSTALL FRONT DISC BRAKE BUSHING DUST BOOT
2010 Toyota Prius
(a) Align the matchmarks of the disc and axle hub, and
install the disc.
Text in Illustration
*1
Matchmark
NOTICE:
When replacing the disc with a new one, select the
installation position where the front disc has minimal
runout.
(a) Install the front disc brake cylinder mounting to the
steering knuckle with the 2 bolts.
Torque: 137 N·m (1394 kgf·cm, 101ft·lbf)
(a) Apply a light layer of lithium soap base glycol grease to
the entire circumference of 2 new front disc brake bushing
dust boots.
HINT:
Apply at least 0.3 g (0.01 oz.) of lithium soap base glycol
Repair Manual
Advertisement
