13. REMOVE REAR DISC BRAKE PAD SUPPORT PLATE
14. REMOVE REAR DISC BRAKE PAD GUIDE PIN
15. REMOVE REAR DISC BRAKE BUSHING DUST BOOT
2010 Toyota Prius
(a) Remove the 2 rear disc brake pad support plates from
the disc brake cylinder mounting.
NOTICE:
Each rear disc brake pad support plate has a different
shape. Be sure to put an identification mark on each rear
disc brake pad support plate so that it can be installed to its
original position.
(a) Remove the 2 rear disc brake pad guide pins from the
rear disc brake cylinder mounting.
(a) Remove the 2 rear disc brake bushing dust boots from
the rear disc brake cylinder mounting.
Repair Manual