Advertisement
9. REMOVE FRONT NO. 1 DISC BRAKE CYLINDER SLIDE PIN
10. REMOVE FRONT NO. 2 DISC BRAKE CYLINDER SLIDE PIN
11. REMOVE FRONT DISC BRAKE BUSHING DUST BOOT
2010 Toyota Prius
Text in Illustration
*1 Front No. 1 Disc Brake Pad Support Plate
*2 Front No. 2 Disc Brake Pad Support Plate
NOTICE:
Each front disc brake pad support plate has a different
shape. Be sure to put an identification mark on each front
disc brake pad support plate so that it can be reinstalled to
its original position.
(a) Remove the front No. 1 disc brake cylinder slide pin
from the front disc brake cylinder mounting.
(a) Remove the front No. 2 disc brake cylinder slide pin
from the front disc brake cylinder mounting.
(a) Remove the 2 front disc brake bushing dust boots from
the front disc brake cylinder mounting.
Repair Manual
Advertisement
