Advertisement
(b) Install the cylinder boot to the piston as shown in the illustration.
NOTICE:
Do not install the cylinder boot after installing the piston into the disc brake cylinder.
5. INSTALL REAR DISC BRAKE PISTON
2010 Toyota Prius
(a) Install the seal portion of the cylinder boot into the
groove portion of the rear disc brake cylinder assembly.
NOTICE:
Securely install the cylinder boot to the groove of the rear
disc brake cylinder assembly.
(b) Using SST, install the rear disc brake piston by turning
it clockwise as far as possible.
SST: 09960-10010
09963-00400
x
Securely install the cylinder boot to the groove of the
piston.
x
Do not damage the piston or cylinder boot.
(c) Using SST, slowly return the piston until the piston
Repair Manual
Advertisement
