18V LI-ION IMPACT DRILL COMPONENT LIST KEYLESS CHUCK TORQUE ADJUSTMENT RING TWO-SPEED GEAR CONTROL FORWARD/REVERSE ROTATION CONTROL SOFT GRIP HANDLE BELT HOOK BATTERY PACK * BATTERY PACK RELEASE BUTTON ON/OFF SWITCH SIGHT LIGHT Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES Save all warnings and instructions for future reference.
Page 5
18V LI-ION IMPACT DRILL b) Avoid body contact with earthed or grounded away from moving parts. Loose clothes, jewellery surfaces, such as pipes, radiators, ranges and or long hair can be caught in moving parts. refrigerators. There is an increased risk of electric g) If devices are provided for the connection of dust shock if your body is earthed or grounded.
18V LI-ION IMPACT DRILL b) Use power tools only with specifically and knowledge, unless they have been given designated battery packs. Use of any other supervision or instruction concerning use of the appliance by a person responsible for their safety. battery packs may create a risk of injury and fire.
Page 7
Recharge only with the charger specified by air temperature is between 18 C and 24 C. Do not ROCKWELL. Do not use any charger other than charge the battery pack in air temperatures below that specifically provided for use with the C, or above 40.5 C.
Page 8
18V LI-ION IMPACT DRILL SYMBOLS Li-ion battery. This product has been marked with a symbol relating to ‘separate collection’ To reduce the risk of injury, user must read for all battery packs and battery pack. It instruction manual will then be recycled or dismantled in order to reduce the impact on the environment.
NOTE: This charger is designed to detect some problems charged, please refer the nameplate of the battery pack that can arise with battery pack. (see table below) supplied by ROCKWELL. *Voltage measured without workload. Initial battery LIGHT ON/OFF FLASH STATUS voltage reaches maximum of 20 volts.
Page 10
18V LI-ION IMPACT DRILL WARNING: Do not operate for long periods 7. TORQUE ADJUSTMENT (See Fig. G) at low speed because excess heat will be (Screw driving force of your drill driver) produced internally. The torque is adjusted by rotating the torque adjustment ring.
18V LI-ION IMPACT DRILL driving, apply a small quantity of liquid soap or the drill body. Position 1 is the lowest torque (screw similar to the screw threads to ease insertion. driving force) and position 20 is the highest torque (screw driving force).
Page 12
POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 MADE IN PRC...