710W/13MM IMPACT DRILL COMPONENT LIST CHUCK DEPTH GAUGE DRILL/IMPACT ACTION SELECTOR SWITCH FORWARD/REVERSE SELECTOR SWITCH SWITCH LOCK-ON BUTTON ON/OFF SWITCH AUXILIARY HANDLE CHUCK KEY Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES 1. WORK AREA SAFETY a) Keep work area clean and well lit.
Page 5
710W/13MM IMPACT DRILL increase the risk of electric shock. controlled with the switch is dangerous and must be e) When operating a power tool outdoors, use an repaired. extension cord suitable for outdoor use. Use of c) Disconnect the plug from the power source and/ or the battery pack from the power tool before a cord suitable for outdoor use reduces the risk of making any adjustments, changing accessories,...
710W/13MM IMPACT DRILL SYMBOL TECHNICAL SPECIFICATIONS Rated voltage 230-240V~50Hz To reduce the risk of injury, user must read Rated power 710W instruction manual Rated no load speed 0-3000/min Impact rate 0- 48000/min Warning Chuck capacity max Ø13mm Drilling capacity Steel 13mm Wear ear protection Masonry...
710W/13MM IMPACT DRILL there are three holes in which the chuck key should “drill ” position. Use a low speed to drive in or remove be inserted. Tighten them equally in turn at each of screws. the three holes, not just at one hole. Your drill bit is 4.
Page 8
POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 MADE IN PRC...
Need help?
Do you have a question about the RD3165 and is the answer not in the manual?
Questions and answers