CORDLESS DRILL COMPONENT LIST KEyLESS ChuCK TORquE ADjuSTMENT RINg FORwARD/REvERSE ROTATION CONTROL SOFT gRIP hANDLE BATTERy PACK RELEASE BuTTON BATTERy PACK ON/OFF SwITCh LED LIghT Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES or dark areas invite accidents. b) Do not operate power tools in explosive Battery pack atmospheres, such as in the presence of...
Page 6
CORDLESS DRILL e) when operating a power tool outdoors, use an controlled with the switch is dangerous and must extension cord suitable for outdoor use. Use of be repaired. a cord suitable for outdoor use reduces the risk of c) Disconnect the plug from the power source electric shock.
CORDLESS DRILL 6. SERvICE 5. After charging, disconnect the battery charger from the supply mains. Then remove the chassis a) Have your power tool serviced by a qualified repair person using only identical replacement connection and then the battery connection. parts.
Page 8
CORDLESS DRILL SyMBOLS battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can To reduce the risk of injury, user must make a connection from one terminal to another. read instruction manual Shorting the battery terminals together may cause burns or a fire.
CORDLESS DRILL TEChNICAL DATA Light ON/OFF Flash Status Green on Charger voltage 100-240V~ 50Hz 20W Charging Red flash Battery voltage Red flash Defective No load speed 0-700 /min Green flash Battery Number of clutch positions 18+1 Max torque 12N.m Green on Fully Charged Chuck capacity 0.8-10mm...
CORDLESS DRILL and rotate the front section in the opposite direction. Consult your local waste authority for information Ensure the drill bit is in the center of the chuck jaws. regarding available recycling and/or disposal options. Finally, firmly rotate the front chuck section in the Discharge your battery pack by operating your drill, opposite directions.
CORDLESS DRILL 3. I CANNOT FIT ThE BATTERy INTO ThE BATTERy ChARgER. why? a) Check if the charger and the battery pack are specifically designed for working together. b) The battery can be inserted into the charger only in one direction. Turn the battery around until it can be inserted into the slot, the indicator light should be red when the battery is charging.
Need help?
Do you have a question about the RS2112 and is the answer not in the manual?
Questions and answers