Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rockwell RD2966
Summary of Contents for Rockwell RD2966
- Page 1 RD2966 18V IMPACT DRILL...
- Page 3 RD2966...
- Page 4 RD2966 Green light Red light...
- Page 5 RD2966...
-
Page 6: Component List
18V IMPACT DRILL COMPONENT LIST Keyless chuck Torque adjustment ring Two-speed gear control Forward/Reverse rotation control Soft grip handle Belt clip Battery pack Battery pack release button Sight light On/Off switch Battery charger Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES PRODUCT SAFETY GENERAL SAFETY WARNINGS... -
Page 7: Electrical Safety
18V IMPACT DRILL you to lose control. result in personal injury. e) Do not overreach. Keep proper footing and 2) ELECTRICAL SAFETY balance at all times. This enables better control a) Power tool plugs must match the outlet. Never of the power tool in unexpected situations. modify the plug in any way. -
Page 8: Battery Charger
18V IMPACT DRILL GENERAL SAFETY WARNINGS FOR 5) BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the BATTERY CHARGER manufacturer. A charger that is suitable for one WARNING Read all safety warnings and all type of battery pack may create a risk of fire when instructions. - Page 9 18V IMPACT DRILL 14. When charging batteries, ensure that the battery Always refer to this instruction and use the charger is in a well-ventilated area and away correct charging procedure. from inflammable materials. Batteries can get hot j) Do not maintain battery pack on charge when during charging.
-
Page 10: Technical Data
18V IMPACT DRILL SYMBOLS TECHNICAL DATA To reduce the risk of injury, user Voltage must read instruction manual No load speed 0-400/0-1500/min Impact rate 0-6400/0-24000bpm Warning Number of clutch 21+1+1 positions Max torque 40N.m Wear ear protection Chuck 13mm Charger protection Wear eye protection class Charging time... -
Page 11: Operation
18V IMPACT DRILL the red light will turn on to indicate the charging speed and torque with increased trigger pressure. process has started. Speed is controlled by the amount of switch trigger 3) When charging is completed,the red light will turn depression. - Page 12 18V IMPACT DRILL firmly tighten a screw, loosen a very tight screw or 10. BELT HOOK (SEE FIG. J) continue working when the battery energy has expired. Screw the Belt Hook on the tool with the screw For manual screwdriver purposes, the chuck is provided in the plastic bag.
-
Page 13: Problem Solution
18V IMPACT DRILL 15. DISPOSAL OF AN EXHAUSTED BATTERY PACK working conditions. Do not re-charge your battery pack below 0 oC and above 45 oC as this will affect To preserve natural resources, please recycle performance. or dispose of the battery pack properly. This battery pack contains Lithium batteries. - Page 16 POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...
Need help?
Do you have a question about the RD2966 and is the answer not in the manual?
Questions and answers