Advertisement
Advertisement
Table of Contents
Related Manuals for Rockwell RD2871
Summary of Contents for Rockwell RD2871
- Page 1 RD2871 18V LI-ION DRILL DRIVER...
- Page 2 RD2871...
- Page 3 RD2871...
-
Page 4: Component List
18V LI-ION DRILL DRIVER COMPONENT LIST ON/OFF SWITCH LED LIGHT KEYLESS CHUCK TORQUE ADJUSTMENT RING FORWARD/REVERSE ROTATING CONTROL SOFT GRIP HANDLE BATTERY PACK RELEASE BUTTON BATTERY PACK BELT CLIP TWO-SPEED GEAR CONTROL Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES The term “power tool”... - Page 5 18V LI-ION DRILL DRIVER surfaces, such as pipes, radiators, ranges and or long hair can be caught in moving parts. refrigerators. There is an increased risk of electric g) If devices are provided for the connection of dust shock if your body is earthed or grounded. extraction and collection facilities, ensure these are connected and properly used.
-
Page 6: General Safety Warnings
18V LI-ION DRILL DRIVER designated battery packs. Use of any other supervision or instruction concerning use of the appliance by a person responsible for their safety. battery packs may create a risk of injury and fire. Children should be supervised to ensure that they c) When battery pack is not in use, keep it away do not play with the appliance. - Page 7 Recharge only with the charger specified by air temperature is between 18 C and 24 C. Do not ROCKWELL. Do not use any charger other than charge the battery pack in air temperatures below that specifically provided for use with the C, or above 40.5 C.
- Page 8 18V LI-ION DRILL DRIVER SYMBOLS Li-ion battery. This product has been marked with a symbol relating to ‘separate collection’ To reduce the risk of injury, user must read for all battery packs and battery pack. It instruction manual will then be recycled or dismantled in order to reduce the impact on the environment.
-
Page 9: Technical Data
18V LI-ION DRILL DRIVER TECHNICAL DATA D) HOW TO CHARGE YOUR BATTERY (See Fig. B1, B2) Connect the battery charger to the power supply and Rated voltage the light (a) will be green. Charger voltage 100-240V~50/60Hz Slide the battery pack into the charger base to make No load speed 0-400/0-1400/min the connections. - Page 10 18V LI-ION DRILL DRIVER drilling or driving at 1 or 2 speeds. A slide switch is magnetic bit holder when using short screwdriver located on top of the drill to select either 1 or 2 speed. bits. When screw-driving, apply a small quantity of When using the drill in the 1 speed range, the speed liquid soap or similar to the screw threads to ease will decrease and the drill will have greater power and...
-
Page 11: Troubleshooting
18V LI-ION DRILL DRIVER TROUBLESHOOTING motor ventilation slots clean. Occasionally you may see sparks through the ventilation slots. This is normal 1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS and will not damage your power tool. THE SWITCH? The forward and reverse switch, which is on top of the trigger, is positioned in the lock function. - Page 12 POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 MADE IN PRC...
Need help?
Do you have a question about the RD2871 and is the answer not in the manual?
Questions and answers
CanI buy another charger for my drill unit as I can't find the orginal one.