3. Software Upgrading
Before upgrading, read the following.
1、Before upgrading,Write down the ADC Calibration values of the channel of VGA and
component。
2、Upgrade the software.
3、To clear the EEPROM .
A Select the item "Clear Unprotected".
B Press VOL+ button to clear the EEPROM data.
C Close the OSD menu after 5 seconds.
D Restart the TV.
4 Write the ADC Calibration values copied just now into the the channels of VGA and
component.
5、After the operation above all, necessarily, Renew search the channels for the users.
3.1 Get ready for upgrading
The software is upgraded by a burning tool- ISP_TOOL4.0.9, which can burn the
program file"*.bin" to the main board of the unit
3.1.1 Install the ISP_TOOL4.0.9-------only for the first time update.
1、 Port Setting:
- 15 -