WHEN REPLACEMENT PARTS ARE REQUIRED, BE SURE TO USE REPLACEMENT PARTS SPECIFIED BY THE MANUFACTURER. Proper service and repair is important to the safe, reliable operation of all Hisense Electric Co., Ltd Equipment. The service procedures recommended by Hisense and described in this Service Guide are effective methods of performing service operations.
Hisense, must first satisfy himself thoroughly that neither his safety nor the safe of the equipment will be jeopardized by the service method selected. Hereafter throughout this manual, Hisense Electric Co., Ltd will be referred to as Hisense. 1.1 Warning 1.1.1...
Page 5
-Note: The wire trees should be routed correctly and fixed with the mounted cable clamps. -The insulation of the mains lead should be checked for external damage. 1.1.6 (1) Do not touch Signal and Power Connector while this product operates. Do not Hisense Confidential - 5 -...
Page 6
(8) Do not damage or modify the power cable. It may cause fire or electric shock. (9) If the power cable is damaged, or if the connector is loose, do not use the product: Hisense Confidential - 6 -...
• While the main power is on, do not touch any parts or circuits other than the ones specified. If any connection other than the one specified is made between the measuring Hisense Confidential - 7 -...
Page 8
All the wires are routed far away from the areas that become hot (such as the heat sink). These wires are fixed in position with the wire clamps so that the wires do not move, thereby ensuring Hisense Confidential - 8 -...
Page 9
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the set. Hisense Confidential - 9 -...
For Component Video Notes: a、Press “M” button and enter factory mode. b、Press “Menu” button and enter factory OSD menu. c、Select the item “Auto Color”. d、Press VOL+ button to auto color. e、Close the OSD menu after 5 seconds. Hisense Confidential - 10 -...
Page 11
Qingdao Jiangxi Road factory Huang Dao Huangdao Industrial Park Gui Yang Gui Yang Industrial Park Liao Ning Liao Ning Industrial Park Hungary Hisense Hungary Australia Hisense Australia France Hisense France Clean data except Clean Protected WB data and Auto Color data...
Page 12
Soft Saturation Saturation of Movie mode Audio Set When value is 1 Think about the Volume Min Audio out power before adjusting Volume 25 When value is 25 Think about the Audio out power Hisense Confidential - 12 -...
Page 13
5kHZ 10kHZ Backlight co PVM 0-350 PVM 350-500 PVM500-1000 PVM 1000-10000 PVM 10000- Power Mode Last station The above “Factory/Service OSD Menu” are reference only, please refer to the actual units to determine the appearances. Hisense Confidential - 13 -...
3.2 Get ready for upgrading 3.2.1 Install the driver MTKtools2.44.04+cp210xDriver.rar Double click the icon , install the driver. Select the default value, the driver will be installed step by step. Hisense Confidential - 14 -...
Page 15
Serial connector: to TV’s RS232 port. For the first connecting, the pc will recognize and automatically install the USB device. The process is just like the installation of a mini disk, see the following picture. Hisense Confidential - 15 -...
The MtkTool using log is restored in the MtkLog folder. It records the running time and date whenever the tool is used. The log will be a txt file named by the date and time. Hisense Confidential - 16 -...
Page 17
3—Press the icon beside the baud rate and make sure it is green as the below picture. 4—Set the flash baud rate to 115200 as the below picture. 5—Click the browse button to select the *.bin file that will be updated. 6—Click the “start” button to update software. Hisense Confidential - 17 -...
Page 18
LCD TV Service Manual Select mode Communicate Flash Select *.bin of Flash chip port Baud Rate file Start upgrade Choose the current USB conversion Port Later choose com5 Information upgrade process Hisense Confidential - 18 -...
Page 19
Note: Whether or not click the “Auto Set Flash Baud Rate” in the “window” menu depends on the chip type. If the flash chip does not support high speed transport, do not select this option; otherwise, reserve the selected mood. Hisense Confidential - 19 -...
Page 20
LCD TV Service Manual Click “Browse” button, find the upgrading program file, and select it. Press “Upgrade” button and start upgrading. The following interface appears on the screen, indicating upgrading successfully. Hisense Confidential - 20 -...
3.4 Update with USB directly he second update method is with USB directly: MTK8222 Series can update with USB, the software name should be HISENSE.bin. The Updating Steps is set the Source to "DMP interface", insert the USB(the update file HISENSE.bin,which should be in root directory),The TV automatic identify the upgrading software.
Page 22
LCD TV Service Manual After upgrading, you must confirm the software in the “Factory Menu ”and you'd better "CLEAR UNPROTECTLY". Hisense Confidential - 22 -...
3.3V supply for U17 ( FLASH) , U14 ( EEPROM) is converted by U4 from 5V_ON . 1.0V supply for U34 ( the main IC \MT8222) is converted by U3 from the 3.3V ; 1.2V power supply for the main IC \MT8222. is converted by the 3.3V Hisense Confidential - 23 -...
Page 24
LCD TV Service Manual Block diagram: Hisense Confidential - 24 -...
Video signal: Video of AV1 input through P16B, pass by R2, C5, R1, C1, enter No.1 feet of U34 Video of AV2 input through P16A, pass by R6, C10, R11, C12, enter No.4 feet of U34 Hisense Confidential - 25 -...
Page 26
AV output send out by the No.11 feet of U34, through the below diagram, finally come out by P4. The input Video signal send out the LVDS signal after the U34 managed, the LVDS signal will pass CN9 and go to LCD panel display. Hisense Confidential - 26 -...
Page 27
Digital audio signal output by feet 47-50 after the disposal of U34, transfer digital to analogue from the U36, change to analogue Signal. One pass the driving diagram to earphone, the other one pass the sound IC to speaker. Hisense Confidential - 27 -...
Page 28
PWM2 protect FRESET# High voltage for Flash written protect protect ADIN0 Key “0” ADIN1 Key “1” IR-IN IR signal PWM1 Tuner 33V Adjust duty ratio TU_33V PWM1 rise voltage GPIO_21 Audio amplify mute Low-level mute Hisense Confidential - 28 -...
Try new batteries Replace battery Replace RC Replace remote control Check IR receiver Change Led & IR board Replace Led & IR BD Change Led & IR cable Replace Led & IR cable Replace main board Hisense Confidential - 54 -...
4.4.2 Troubleshooting for Function Key Buttons does not work Check solder connections and Check switches see if any switches are stuck. Replace Key BD Check key board Check Key BD cable Change Key BD Replace main board Hisense Confidential - 55 -...
Try Power on by RC and Button Check signal Panel Bright Source Neither Both works Work Replace Main Replace Main BD Power on Replace Panel (to contact Hisense tech support.) Replace Power BD Hisense Confidential - 56 -...
LCD TV Service Manual 4.4.4 Troubleshooting for Audio No sound Reconnect Check connecter Replace speaker wire Check speaker wire Replace speaker set Check speaker set Replace main board Power Supply Board Hisense Confidential - 57 -...
LCD TV Service Manual 4.4.5 Troubleshooting for TV/VGA/HDMI input No picture on the screen Check Signal Source Make sure signal source is available Reconnect Check connect Replace cable Check cable Replace main board Hisense Confidential - 58 -...
LCD TV Service Manual 4.4.6 Troubleshooting for YPbPr input No picture on the screen Check Source work or not Check Source Device Reconnect Check connect Check Wires (Green Blue, Red) Replace wires Replace main board Hisense Confidential - 59 -...
LCD TV Service Manual 4.4.7 Troubleshooting for Video/S-Video input No picture on the screen Check Source work or not Check Signal Source Reconnect Check connect Replace Cable/Wires Check Cable/ Wires Replace main board Hisense Confidential - 60 -...