Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hisense LCD COLOUR TV
Summary of Contents for Hisense LCD COLOUR TV
- Page 1 LCD COLOUR TV USER'S MANUAL LCD 2003EU English Part No: IES041104...
-
Page 2: Table Of Contents
Please read all the safety and operating instructions carefully before you begin. This is an IEC safety class CONTENTS Brief operating instructions ..................Important safeguards . -
Page 3: Osd Language Settings
OSD language Settings When you start using your set for the first time, the Option menu will be displayed on the screen as shown on the right. 1.Press the button to select the OSD language . 2.Press the select the language that you want to use. -
Page 4: Connection
Brief Operating Instructions 1.Connection Connect the antenna lead or CATV cable or extern al equipments (such as Antenna, Cable TV, VCD, DVD, VCR, Set top box, etc.) to the corresponding terminals or interface on the TV rear (ple ase refer to the owner s manual of the equipment to be connected as well) and confirm that the signal source is available and works normally. -
Page 5: Signal Source Selection
3.Switching on/off 1)Connect the TV to power outlet, if the power indicator is red, it means the TV is off now. You need to press the POWER switch or the POWER button on the remote control to turn on the TV, and the power indicator will display blue. -
Page 6: Important Safeguards
CAUTION CAUTION: TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important safeguards To prevent fire or shock hazard, do not expose this appliance to rain or moisture. FIRE AND SHOCK PRECAUTIONS Adequate ventilation must be provided to prevent heat build up inside unit. -
Page 7: Learning About Your New Tv
Learning about your new TV You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the front and the back panel provide all the connections you will need to connect other equipment to your TV. Front Controls Back Connections Note: The above figures are for reference only, please refer to the actual units to determine their appearance. -
Page 8: Selecting A Location For The Tv
Learning about your new TV Channel down / cursor down Channel up / cursor up Volume down / cursor left Volume up / cursor right TV / AV / PC input select MENU button POWER button (standby) Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. -
Page 9: Connecting The Pc
Connecting your TV NOTE: 1) Headphones are not included. 2) No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack. Connecting the PC You can use your TV as a monitor for the devices as shown below. -
Page 10: Using The Remote Control
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. -
Page 11: Shortcut Keys Operation
Shortcut keys operation Connecting POWER Notes:1.Use a commercially available AC plug , if necessary, depending on the design of the wall outlet. 2.Always release the AC power switch or remove the AC power plug from the outlet when not using for a long period of time. -
Page 12: Adjusting Sound Volume
Shortcut keys operation Adjusting sound volume Press VOL- or VOL+ on the remote control or segment of the indicator will decrease or increase. Muting the sound Press the MUTE on the remote control to temporarily turn off the sound. To restore the sound, press MUTE again. -
Page 13: Selecting The Picture Mode
Shortcut keys operation Selecting the picture mode You can select the picture quality instantly from among three preset modes and one user-set mode. Press the P.MODE button on the remote control repeatedly to select the desired picture quality. Selecting the sound mode You can select the sound effect instantly from among three preset modes and one user-set mode. -
Page 14: Menu Operation
Menu operation Using the Picture Parameters menu Adjust picture settings 1) Press the MENU button to enter the main menu. button to select the item Picture Parameters, and 2) Press the press the button to enter 3) Press the button to select the item you want to adjust. 4) Press the button to adjust the level. -
Page 15: Using The The Geometry Menu
Menu operation Using the Geometry menu Geometry 1) Press the MENU button to enter the main menu. button to select the item Geometry, and press the 2) Press the Press the button to select the item you want to adjust. Press the button to change the value. - Page 16 Menu operation Option 1) Press the MENU button to enter the main menu. button to select the item General Settings, and press 2) Press the button to enter General Settings menu. button to select item Option. 3) Press the button to enter the Option menu. 4) Press the Press the button to select the item you want to adjust.
-
Page 17: Using The Search Menu
Menu operation Using the Search menu Colour System You can set colour system for different valid input signal. 1) Press the MENU button to enter the main menu. button to select the item Sea ch, and press 2) Press the Search button to enter button to select Colour System. -
Page 18: Appendix
Appendix Cleaning and care WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians. To clean the TV screen: 1) Unplug the TV to avoid possible shock hazard. 2) Use a damp cloth or clean cellulose sponge to clean the TV screen and trim. Do not allow water to spill into the cabinet or damage may occur. -
Page 19: Troubleshooting
Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem TV will not turn on No picture, no sound No sound, picture OK Poor sound, picture OK Poor picture, sound OK Poor reception of broadcast channels Multiple images... -
Page 20: The Scart Interface
Appendix The SCART interface Scart Connector Pinout Details Pin Signal Audio output B (right) Audio input B (right) Audio output A (left) Ground (audio) Ground (blue) Audio input A (left) Blue input Function select (AV control) Ground (green) 11 Green input 13 Ground (red) 14 Ground (blanking) 15 Red input/ Chrominance input... -
Page 21: Specificatians
Appendix Specifications 20.1 INCHES TFT LCD LCD panel Multi- standard(PAL,SECAM) Television system VHF-L: 1A-S8 Channel coverage VHF-H: S9-S38 UHF: 640X480/ 60Hz Analog RGB mode 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz,720P/60Hz Y Pb/Cb Pr/Cr mode 640X480 Resolution 350:1 Contrast 450cd/m Brightness 176 (H)/176 (V) Viewing angles English/French/Italian/German/Spanish/Portuguese/Dutch OSD language...