Operator's Manual - Arctic Cat 400 3in1 Owner's Manual

Precautionary measures
The more you familiarize with the
operation of your vehicle, the better
you can handle it.
Always wear protective clothing:
Helmet, goggles,
shirt, long pants and boots with low
heels and a good tread which pre-
vents you from slipping.
!! WARNING !!
Beginning and inexperienced ATV
riders should take a rider training
course in occasion of which they
obtain or reinforce riding skills
and get to know some operating
techniques. For further information
please contact an authorized
ARCTIC CAT ATV-dealer.
������ �� � ��
��������������� ��
������� ��� � ��� ����������
���������� ������������
ENGLISCH
Check before starting
!! WARNING !!
Always inspect this ATV each
time you use it to make sure it is
in safe operating conditions. Use
long-sleeved the checklist you'll find at the next
page.
Brake burnishing procedure:
The main brake is activated by
the foot pedal (according to direc-
tive 93/14A EC homologation).
The hand lever activates only the
parking/auxiliary brake which must
not be used as service brake.
For off road use, there is the pos-
sibility to exchange the brake cir-
cuits - thus, the service brake is
activated by the hand lever.
For this purpose an appropriate
conversion kit is available. For more
details, please ask your dealer.
15
Operator´s Manual
!! IMPORTANT !!
For perfect brake efficiency you
have to burnish the brake pads.
To do so, please follow the instruc-
tions below:
Choose an area sufficiently large
to safely accelerate your ATV to 30
km/h.
Accelerate to 30 km/h, then com-
press brake lever to decelerate to
0 – 5 km/h.
Repeat this procedure approx. 20
times until brakes are heated up.
The mirrors are to be found on the
vehicle. When mounting the mir-
rors, please do not crew them in
completely to the stop, but fix them
first with the counter-nut. (Other-
wise you risk to seriously damage
the support!
���������� ����������� ��������
21.05.2006, 14:44 Uhr
Page 13
�����������������