Open Window Function; Screen Brightness Function - Rointe K series Instruction Manual

2. Press and we can select using
The symbol and the temperature will flash.
3. After pressing the button
show as SEL1, SEL2, SEL3.... We can go forwards and backwards using the button
. Press to select the day that we wish to program.
4. Pressing , takes us to the hour we wish to program. To change the hours use the
, buttons. The hours selected will show as (0h, 1h, 2h,...). By pressing the
we can select hour by hour the mode required: CONFORT, ECO or OFF.
5. To finish the programming press
1.8. "Open Window" function
This function is activated when the probe detects a reduction of 4º in respect of the set
temperature during 30 minutes. On activation the following image will appear on the radiator
display for 5 seconds:
When the "Open window" function is activated, the following screen will appear showing that
the anti-frost mode is activated:
This function will be active for 2 hours. If the button
radiator will switch off. Pushing the button
"Open window" function being switched on.

1.9. Screen brightness function

You can change the brightness of the screen by pushing the button
the product is in manual mode. Entering this mode you will see the following screen:
and the ECO temperature (15ºC to 19.5ºC).
once again, the numbers of the week will start flashing and
or leave it for 30 seconds without pressing any buttons.
again will switch on the radiator without the
is pushed during this period the
for 3 seconds when
and
or
button,
7