Menu/Programming Function; Open Window Function - Rointe SYGMA Instruction Manual

SYGMA

1.7. Menu/Programming function

In automatic mode, pressing
the radiator directly:
1. Select the COMFORT temperature setting (20ºC to 30ºC), using
and . The symbol
2. Press
using
3. After pressing the button
start flashing and show as DAY1, DAY2, DAY3... We can go forwards
and backwards using the button
the day or days that we wish to program.
4. Pressing
the hours use the
as 0h, 1h, 2h,... By pressing the
required hour by hour: COMFORT, ECO or OFF.
5. To finish the programming, press
without pressing any buttons.
1.8. "Open Window" function
This function is activated when the probe detects a reduction of 4º in
respect of the set temperature during 30 minutes. On activation the
following image will appear on the radiator display for 5 seconds:
When the "Open window" function is activated, the following screen
8
and the temperature will flash.
and we can select the ECO temperature (15ºC to 19.5ºC)
and . The symbol
, takes us to the hours we wish to program. To change
or
for 3 seconds allows you to program
and the temperature will flash.
once again, the days of the week will
and
buttons. The hours selected will show
button, we can select the mode
or leave it for 30 seconds
. Press to select