Setting Up Wireless Printing - Lexmark C925 User Manual

2
Select the printer.
3
Right-click the printer, and then select Properties.
4
Click the Configuration tab.
5
Click Update Now - Ask Printer or manually add any installed hardware options under Configuration Options.
6
Click Apply.
For Macintosh users
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to:
System Preferences > Print & Fax > select your printer > Options & Supplies > Driver
2
Add any installed hardware options, and then click OK.
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Go > Applications > Utilities
2
Double-click Printer Setup Utility or Print Center.
3
Select your printer.
4
From the Printers menu, choose Show Info.
5
Add any installed hardware options, and then click Apply Changes.

Setting up wireless printing

Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wireless Encryption Protocol (WEP) and
Wi-Fi Protected Access (WPA) are types of security used on a network.
Information you will need to set up the printer on a wireless network
Note: Do not connect the installation or network cables until prompted to do so by the setup software.
•
SSID—The SSID is also referred to as the network name.
•
Wireless Mode (or Network Mode)—The mode will be either infrastructure or ad hoc.
•
Channel (for ad hoc networks)—The channel defaults to auto for infrastructure networks.
Some ad hoc networks will also require the auto setting. Check with your system support person if you are not sure
which channel to select.
Additional printer setup
52