Solving Home Screen Applications Problems - Lexmark C925 User Manual

Large jobs do not collate
These are possible solutions. Try one or more of the following:
M C
AKE SURE OLLATE IS SET TO
From the Finishing menu or Print Properties, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of
images, and the number of pages in the job.
M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.
Unexpected page breaks
I P T
NCREASE THE RINT IMEOUT VALUE
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts > Print Timeout
2
Increase the Print Timeout value, and then touch

Solving home screen applications problems

An application error has occurred
C
HECK THE SYSTEM LOG FOR RELEVANT DETAILS
1
Type the printer IP address or host name in the address field of your Web browser.
If you do not know the IP address or host name of the printer, then you can:
•
View the information on the printer control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Settings or Configuration.
3
Click Device Solutions > Solutions (eSF) > System tab > Log.
4
From the Filter menu, select an application status.
5
From the Application menu, select an application, and then click Submit.
O
N
.
Troubleshooting
191