Print Is Too Dark - Lexmark C925 User Manual

M
AKE SURE THE TRANSFER MODULE IS NOT DEFECTIVE
Replace the defective transfer module. For more information, see the instruction sheet that came with the
replacement part.
M
AKE SURE THE FUSER IS NOT DEFECTIVE
Replace the defective fuser. For more information, see the instruction sheet that came with the replacement part.

Print is too dark

Try one or more of the following:
C ,
HECK THE DARKNESS
The Toner Darkness setting may be too dark, the Brightness setting may be too dark, or the Contrast setting may be
too high.
•
Change these settings from the printer control panel Quality menu.
•
For Windows users, change these settings from Print Properties.
•
For Macintosh users:
1
Choose File > Print.
2
From the Orientation pictures drop-down menu, choose Printer Features.
3
Choose a lower value for the Toner Darkness, Brightness, and Contrast settings.
L
OAD PAPER FROM A FRESH PACKAGE
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.
A
VOID TEXTURED PAPER WITH ROUGH FINISHES
C P T
HECK THE APER YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray or feeder:
•
From the printer control panel Paper menu, check the Paper Type setting.
•
For Windows users, check this setting from Print Properties.
•
For Macintosh users, check this setting from the Print dialog.
,
BRIGHTNESS AND CONTRAST SETTINGS
Troubleshooting
199