Lexmark C925 User Manual page 44

Installing 550-sheet trays
Notes:
• The printer supports a maximum of three optional 550-sheet trays.
•
When installing three optional 550-sheet trays, use a printer stand converted into a caster base.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained
personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall
outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.
Note: This task requires a screwdriver.
1
Unpack the optional tray and the printer stand, and then remove all packing material.
1 Optional 550-sheet tray
2 Printer stand
3 Brackets and screws
4 Thumbscrews
2
Turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices
attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1
4
3
Additional printer setup
44
2