Lexmark C925 User Manual page 124

Menu item
Paper Sizes
US
Metric
Displayed Information
Left side
Right side
Custom Text [x]
[x] Toner
[x] Imaging Unit
Fuser
Transfer Module
Description
Specifies the default paper measurement
Notes:
•
The initial setting is determined by your country or region
selection in the initial setup wizard.
• Changing this setting also changes the default for each input
source in the Paper Size/Type menu.
• When set to Metric, the printer supports letter-size and
11 x 17 paper in the standard 150-sheet tray and
multipurpose feeder.
Specifies what is displayed on the upper left and right corners of
the home screen
For the Left side and Right side menus, select from the following
options:
None
IP Address
Hostname
Contact Name
Location
Date/Time
mDNS/DDNS Service Name
Zero Configuration Name
Custom Text [x]
Model Name
For the [x] Toner, [x] Imaging Unit, Fuser, and Transfer Module
menus, select from the following options:
When to display
Do not display
Display
Message to Display
Default
Alternate
Default
[text entry]
Alternate
[text entry]
Notes:
•
IP Address is the factory default setting for Left side.
• Date/Time is the factory default setting for Right side.
•
"Do not display" is the factory default setting for "When to
display."
•
Default is the factory default setting for Message to Display.
Understanding printer menus
124