Oki OKIPAGE 10e Maintenance Manual page 34

(5) Transfer
The transfer roller is composed of conductive sponge material, and is designed to get the
image drum surface and the paper in a close contact.
Paper is placed over the image drum surface, and the positive charge, opposite in polarity to
that of the toner, is applied to the paper from the reverse side.
The application of a high positive voltage from the power supply to the transfer roller causes
the positive charge inducement on the transfer roller surface, transferring the charge to the
paper as it contacts the transfer roller. The toner with negative charge is attracted to the image
drum surface, and it is transferred to the upper side of the paper due to the positive charge
on the reverse side of the paper.
41154001TH Rev.2
Image drum
Transfer roller
Paper
Power
supply
34 /