Olev-11-Pcb - Oki OKIPAGE 10e Maintenance Manual

3.3.3

OLEV-11-PCB

(1) Remove the upper frame [ see 3.3.2 steps (1) through (3) ].
(2) Remove the connector 1.
(3) Remove 2 screws 2, and remove the OLEV-11 PCB 3.
When reinstalling the printed circuit board, be careful to make sure that the sensor plate is
being set correctly.
Sensor Plate
41154001TH Rev.2
1
3
3
2
142 /