Replacement Parts List - Napoleon 9600 B SERIES Installation And Operating Instructions Manual

56
22.0

REPLACEMENT PARTS LIST

Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally
all parts can be ordered through your Authorized dealer / distributor.
IOM
IOM
FOR WARRANTY REPLACEMENT PARTS, A PHOTOCOPY OF THE
ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR THE CLAIM.
When ordering replacement parts always give the following information:
• Model & Serial Number of appliance
• Installation date of appliance
• Part number
• Description of part
• Finish
FOR FURTHER INFORMATION, CONTACT YOUR AUTHORIZED DEALER.
Part
Number
W010-2534
W010-2535
W010-2538
W010-2539
W010-2540
W010-2541
W010-2542
W010-2543
W010-2544
W010-2545
W010-2546
W010-2546
W010-2558
W010-2559
W010-2560
W010-2561
W010-2562
W010-2563
W010-2564
W010-2565
W010-2567
W010-2568
W010-2569
W010-2570
W010-2571
W010-2572
W010-2573
W010-2610
W010-2768
W010-2993
W010-3201
W010-3241
W020-0647
W415-1241 / A / 03.18.15
Part Description
KIT, SMALL FMC WITH GASKETS 40/60/80
KIT, LARGE FMC WITH GASKETS 100/120
ASSY, MOTOR KIT 1/3 HP ECM 2.3/EON 40
ASSY, MOTOR KIT 1/2 HP ECM 2.3/EON 60
ASSY, MOTOR KIT 1/2 HP ECM 2.3/EON 80-3
ASSY, MOTOR KIT 3/4 HP ECM 2.3/EON 80-4/100
ASSY, MOTOR KIT 1 HP ECM 2.3/EON 120
ASSY, MOTOR KIT 1/3 HP X13 40
ASSY, MOTOR KIT 1/2 HP X13 60
ASSY, MOTOR KIT 1/2 HP X13 80-3
ASSY, MOTOR KIT 3/4 HP X13 80-4/100
ASSY, MOTOR KIT 1 HP X13 120
EXHAUSTER, TWO SPEED GENTEK
BLOWER, 12-7T HOUSING 60/80
BLOWER, 12-10T HOUSING 100/120
CONTROL, INTERGRATED ECM 2.3/EON
SENSOR, FLAME - REPLACEMENT
FUSE, 5 AMP
IGNITER, 601 TYPE TB 120V
SWITCH, BLOWER DOOR
SWITCH, HEAT LIMIT 140°F - 20°F
SWITCH, BURNER ROLLOUTS REPL 350°F
SWITCH, PRESSURE UNIT TRIPLE
SWITCH, HEAT LIMIT 150°F
TRANSFORMER, CHOKE COIL
TRANSFORMER, 120V / 24V 40VA
VALVE, TWO STAGE
BLOWER, 10-6T HOUSING 40
ASSY, CONDENSATE TRAP
SWITCH, HEAT LIMIT 170°F
ASSY, MOTOR KIT 3/4 ECM 2.3/EON 80-4
SWITCH, HEAT LIMIT 125°F
BAGGIE, REPLACEMENT PARTS
WARNING
!
FAILURE TO POSITION THE PARTS
IN ACCORDANCE WITH THIS
MANUAL OR FAILURE TO USE ONLY
PARTS SPECIFICALLY APPROVED
WITH THIS APPLIANCE MAY
RESULT IN PROPERTY DAMAGE OR
PERSONAL INJURY.
H41.1