Time And Communication Module Tcm-01(Xts); Auxiliary Relay Module Arm-02 (Xts); External Cooling Fan Unit Ecf-01 (Xts) - Xtender XTS 900-12 User Manual

Studer Innotec SA
Xtender
9.4 T TCM-01(XTS)
IME AND COMMUNICATION MODULE
This module, mounted inside the XTS, allows the XTS to be connected
with the remote control RCC-02/03, as well as to Xtender compatible
devices and accessories. The module also features a real time clock
and connectors to connect the ARM-02, RCM-10 and BTS-01 modules.
Note: In recent XTS versions the functionalities of this module have been
integrated in the control electronics and it is therefore no longer
present. (see "Connection compartment, XTS" in chapter 3.6.3.).
9.5 A ARM-02 (XTS)
UXILIARY RELAY MODULE
This external module is connected to the plug (2) (described in chapter
xx) by a 5m cable supplied with the accessory. It provides the XTS with
auxiliary relays as described in sect. 7.5 - p. 31. This module can be
mounted on DIN rail.
If the plug (2) is already used for the temperature senor BTS-01, it should
be moved to the free plug on ARM-02.
9.6 E ECF-01 (XTS)
XTERNAL COOLING FAN UNIT
The external cooling fan unit ECF-01 is an optional accessory.
It improves the performance of the device (see technical data p. 57).
It is particularly recommended to use this accessory if the ambient
temperature is high (> 40 ° C).
This unit has an IP 54 protection rating and can
be exposed to a spray of water without
damage. However, it cannot be exposed to a
spray of dirty water to prevent mud or similar
particles from clogging the mechanism. The
assembly instructions are supplied with the
accessory.
User manual V4.6.0 37