Table of Contents
Advertisement
Chapter 4
2.
Mount the remote expansion tank in a position where the bottom of the unit is no lower than where the filler
cap was (P1) on the original expansion tank, as shown in figure (P).
3.
Connect the new bleed hoses (P2) to the tank and the original fittings on the engine.
4.
Connect the main inlet hose to the engine (P3).
5.
Secure the inlet hose (P3) the front of the engine in the position shown in (P4) with the hose clip.
Page 32
N38143
Hide quick links:
Advertisement
Table of Contents
