Table of Contents
Advertisement
Comfort controls
To listen to a CD
With CD player
1. Press the PWR switch to turn the audio system ON and
OFF. The system turns on in the last mode used.
2. Insert the disc with the label facing up.
When a disc is inserted, the CD player will begin playing
even if the radio is being used. The CD player will also
begin playing when the CD button is pressed with a disc
set in the CD player or in the disc loading slot, even if the
radio is being used.
NOTE
For information concerning the adjustment of volume and
tone, refer to "To adjust the volume" on page 5-48 and
"To adjust the tone" on page 5-49.
For information concerning the handing of the compact
discs, refer to "Handling of compact discs" on page 5-100.
5
With CD changer
The compact disc (CD) can be loaded or ejected by pressing
the LOAD button or the eject button even if the audio system
power is OFF.
1. Press the PWR switch to turn the audio system ON and
OFF. The system turns on in the last mode used.
2. Press the CD button to enter CD mode. The CD changer
will start playback if the CD is already in the CD changer.
3. To stop the CD, turn off the power by pressing the PWR
switch or change over to radio mode by pressing the
RADIO button, or eject the disc by pressing the eject but-
ton.
5-64
NOTE
For information concerning the adjustment of volume and
N00735501032
tone, refer to "To adjust the volume" on page 5-48 and
"To adjust the tone" on page 5-49.
As many as 6 CDs can be inserted into the CD changer.
For information concerning the handing of the compact
discs, refer to "Handling of compact discs" on page 5-100.
To set a single disc
1. Press the LOAD button briefly.
2. The CD changer will show "WAIT" on the display and
start making itself ready for disc loading.
3. When the CD changer is ready for disc loading, the
LOAD indicator will illuminate and the display will show
"LOAD DISC No. (1-6)".
4. When a disc is inserted into the CD slot, the disc will
begin to play.
NOTE
If there are multiple empty slots, you can select your
desired slot by pressing the DISC buttons.
If you do not insert a disc for about 15 seconds after the
CD changer starts standing by for loading, the loading
standby mode will be canceled.
To set all the discs
1. Press the LOAD button for 2 seconds or longer (until you
hear a beep).
2. The CD changer will select the lowest-numbered empty
slot and switch to loading standby mode.
3. When the display shows "LOAD DISC No.(1-6)", insert a
disc. The CD changer will then automatically select the
next empty slot and enter loading standby mode.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Chapters
Table of Contents
