Table of Contents
Advertisement
Features and controls
NOTE
Mirror image is displayed on the screen.
Monitor brightness is adjusted automatically by sensors.
It is possible to change the display language of the screen.
For details, please refer to the separated owner's manual
for "Mitsubishi Multi-Communication System" or
"Change language or turn off the inside rearview mirror
screen: To change the language of warning text (3)" on
page 3-124.
Under certain circumstances, it may become difficult to
see an image on the screen, even when the system is func-
tioning correctly.
• In a dark area, such as at night.
3
• When water drops or condensation are on the lens.
• When sun light or headlights shine directly into the lens.
Change language or turn off the inside rearview
mirror screen
It is possible to turn off the screen of the inside rearview mirror
and change the language of the warning messages on the
screen.
3-124
To temporarily set the non-display mode
If you press the switch (1) while the image appears on the
screen, it goes off temporarily.
To return to display mode, press the switch again or perform
N00568900053
the following operation.
[Except for vehicles equipped with the Free-hand Advanced
Security Transmitter (F.A.S.T.-key)]
Turn the ignition switch to the "ON" position after turning to
"OFF" or "ACC" position.
[For vehicles equipped with the Free-hand Advanced Security
Transmitter (F.A.S.T.-key)]
Put the operation mode in ON after putting the operation mode
in OFF.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Chapters
Table of Contents
